NOVA chat User’s Guide Page 105Choosing a VoiceWhen choosing a voice to use for the auditory prompts, it can be helpfulto choose a different voice than the one the system uses for speakingmessages.To change the voice, choose Menu > Settings > Input > Scanning >Auditory Prompts > Voice Settings.Note: Pitch is available as an option only if Acapela is selected as thesynthesizer.Tap the arrow to the right of the currently selected voice to open a listof voices. Choose the voice you want. If necessary, adjust the voice’spitch or talking speed:1. Slide your finger along the Pitch or Rate bar or tap a bar at a specificpoint.2. Tap Test to make sure that you selected the pitch or rate you want.3. If not, adjust the setting and tap Test again.4. When the voice is set the way you want, tap Save.Note: If you want to name an auditory prompt for a row or group, see“Configuring Custom Scan Patterns” on page 105.Configuring Custom Scan PatternsUse the Scan Editor to create and save custom scan patterns for the user.You can set up a scan pattern for all pages in a vocabulary, then set updifferent patterns for specific pages, such as keyboard pages.Note: If you also want to set up visual effects for the user, see“Configuring Visual Effects for Scanning” on page 114.
