Chapter 1 - Getting Started957 Operator’s Manual, Rev. B Page 15the KEYPAD to enter the desired speed, then press the ENTERkey to start going to the demo cursor location.To go back to the CHART screen (but stay in demo mode),press the RETURN key twice. The word DEMO always appearson the CHART screen when you’re in demo mode.To exit demo mode, on the DEMO CHART screen, press theEXIT DEMO key. This immediately returns you to the CHARTscreen.NOTE:Video image display, chart rotation, and zooming in and out all work nor-mally on the DEMO CHART screen.Going to a quick waypoint nowYou can point to any location on the CHART screen and goright to it. This is called “point-and-shoot” navigation, whichcan be the easiest and most powerful way to go to a waypoint:Just select different locations and go to them, one at a time,right on the chart. This way of navigating provides the mostflexibility in deciding where you want to travel. Simply movethe cursor wherever you want, press a key, and you’renavigating.1. Press the CHART function key to display the CHARTscreen.2. Move the cursor to the desired chart location by pressingthe CURSOR PAD in the lower right corner of the 957.3. Press the GO TO CURSOR menu key at the lower right ofthe screen.
