Menu
National Datacomm InstantWave NWH650 User Manual
                                                             | |
Contents
| 
InstantWave High Rate 11Mbps Access Point 39Figure 35. Upgrade AP FirmwareThe Upload button will then become enabled. Click Upload to start uploading thefile to the Access Point. The APMS and the AP’s built-in Trivial File TransferProtocol (TFTP) command will upload the new executable into the AP’s flashmemory area. If the upload activity fails, an error message will be shown on themessage box.Resetting the AP will take about 30 seconds. During this time, the APMS programwill not be able to query the AP via the SNMP protocol and the AP will not beavailable to other stations. If you try to access it, the APMS program will display a“No response from the AP” message.When the file transfer is complete, click OK to close the window.Reset APAfter changing the AP’s IP, Access Control, or Wireless options, the AP needs tobe reset to enable the new settings. Prior to exiting the APMS program, orselecting a different AP, click the Reset AP menu item. A confirmation windowwill open. Click OK to reset the AP or Cancel to abort the reset command. |
Related manuals for National Datacomm InstantWave NWH650
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved