6-4 Communicating with Your NEC VersaInserting a PC CardTo insert a PC card, follow these steps.1. Align the card so that the 68-pin connector points towards the slot and the arrowshows on the top face of the card.2. Slide the card into either slot. (Install Type III cards in the bottom slot, only.) Alow tone followed by a high tone lets you know that the card is fully inserted andrecognized. (If you turn off the sound through the function keys or volume control,no sound is emitted.)Other tone sequences such as high, then low tones, indicate that the card isinserted, but the card type is unknown.Inserting a PC Card3. Use the software preinstalled on your system to check PC card slot availability.Look for the PC Card icon in the Control Panel or on the right side of the taskbar.It shows which slot contains a PC card and which is empty.Removing a PC CardFollow these steps to remove a PC card in Windows 98.1. Double click My Computer, double click Control Panel, and double click the PCcard icon or, simply double click the PC card icon from the taskbar.2. Select the PC card to remove, and select Stop.The Windows operating system alerts you if any applications are still using thecard. If all applications using the card are closed, services for that card are shutdown. You receive a message saying that it is safe to remove the card.3. Press the button on the side of the PC card in the slot.
