Using the System Drives and Bays 5-9Note Before recording from the external CD-ROM drive to the internal hard diskdrive, disable the internal microphone. To disable the internal microphone, remove thecheck from the Microphone box in the 'Show the following controls' window. Refer to theinstructions in Chapter 9, "Optimizing the Sound Quality," for details about recording.Using the CD-ROM Drive as a Stand-Alone CD PlayerIf you purchase the CD-ROM AC adapter accessory, you can use the external 24XCD-ROM drive as a stand-alone CD player. Follow these steps to use the CD-ROMdrive as a stand-alone CD player.1. Disconnect the CD-ROM drive from the NEC Versa FX system.2. Locate the CD-ROM AC adapter accessory.3. Connect the CD-ROM AC adapter to the AC Power port on the right side of theCD-ROM drive.4. Connect the outlet plug of the AC adapter to an active electrical wall outlet.5. Follow steps 4-6 in the procedure, “Using the CD-ROM drive with your NECVersa,” to open the drive cover and insert a CD.6. Press the Play button to activate your audio CD!Disconnecting the CD-ROM DriveWhen disconnecting the CD-ROM drive cable, squeeze the release clips before pullingthe cable away from the system port or the CD-ROM drive.Failure to squeeze the release clips may result in damage tothe cable connectors.
