6-6 Communicating with Your NEC VersaInternal ModemYour NEC Versa FX system ships with a V.90/K56flex™ internal modem that allowsyou to connect to the Internet, send a fax, or access your email.Note When using a modem outside the U.S. and Canada, you might need aninternational telephone adapter, available at most electronics supply stores.Use only a 26AWG phone line cord when connecting theinternal modem.Connecting the Internal ModemFollow these steps to connect an RJ-11 telephone cable to the internal modem.1. Locate the RJ-11 telephone cable that ships with your NEC Versa. Each end of thecable has an RJ-11 connector that plugs into a standard telephone outlet.2. Locate the RJ-11 port on the left side of your system and open the cover.3. Carefully plug the RJ-11 telephone cable into the RJ-11 port.Connecting the RJ-11 telephone cable4. Connect the other end of the RJ-11 telephone cable into an (analog) phone jack.Now you are ready to configure your modem for internet or email access!
