NEC VERSA 4200 Manual

Also see for VERSA 4200: Manual

Contents

NEC VERSA 4200 Manual Manual pdf 60 page image

Using Setup 3-7 Suspend Mode Suspend mode includes a method of operation calledSuspend/Resume that stores information in RAM and maintains RAMcontents after shutting down all local devices. You can also select Saveto File, which saves all your open data files to a special file on the harddisk and turns the system completely off. When you turn the system backon or when you select Resume, all your data is automatically recoveredfrom where you left off. Suspend Warning Tone This parameter lets you enable or disable awarning tone when Suspend mode starts. Keep this option enabled. PCMCIA (PC) Card Power This parameter lets you turn off power tothe PC Card slots in order to conserve power. Slot power cannot beturned off if a card is installed in the slot.Fn and F7Another way to toggle between the power settings described here is using thefunction key, Fn + F7. Press Fn + F7 to toggle through the various PowerManagement settings. The faucet icon on the status bar changes to reflectthe new setting.Any selection you make by pressing Fn + F7 overrides the settings you madeon the Power Savings Setup screen. The Setup power settings are not in ef-fect until the next power-on.SecurityYour NEC Versa 4200 supports a password for system security on severallevels. Using the Security screen, you can require that a password be entered to use Setup at each startup or boot each time the system resumes from Suspend mode.To use your system, you are not prompted to enter a password until you setan initial password. Your system is not protected until you set a password.Once you set a password, you must enter it before you can enter Setup; thisfeature allows only an authorized user to change system parameters. In ad-dition, you can choose to require the password be entered each time you startthe system and each time the system resumes from Suspend mode.