NEC VERSA 4200 Manual

Also see for VERSA 4200: Manual

Contents

NEC VERSA 4200 Manual Manual pdf 59 page image

3-6 Using SetupNOTEWhen setting the time and date, enter leading zeroes. Forexample, to enter 9:20 a.m. and February 4, 1996, type 09:20:00and 02/04/1996.DrivesThe drive parameters let you check and change settings for your drives, in-cluding internal hard drives, diskette drives, and docking station hard drives.This option may only appear when the NEC Versa 4200 is docked at theDocking Station 4000 or the PortBar 4000. To boot from an IDE drive in-stalled in the docking station, select “Yes” for Boot Docking Station IDE.Note that if you select “Yes,” you can no longer access the NEC Versa4200’s internal drives (floppy, hard disk, or CD-ROM)Or, select “No” to boot from either the internal hard drive or from abootable option (floppy, hard disk, or CD-ROM).PeripheralsThe Peripherals screen displays the location of the connection between thesystem and the Input/Output (I/O) ports.Power SavingsThe Power Savings screen lets you balance high performance and energyconservation using parameters including the following: Power Management Under AC Normally, whenever AC power isconnected to the NEC Versa 4200, power management is disabled. If youenable this parameter, the system automatically activates the power man-agement profile you set in Power Savings. Power Savings The Highest Performance setting provides the greatestsystem performance. Longest Battery Life provides maximum powersaving, and Off disables all device timeouts. Your system comes presetwith Custom Settings as the default. You can enter values for devicetimeouts.