NEC VERSA 4200 Manual

Also see for VERSA 4200: Manual

Contents

NEC VERSA 4200 Manual Manual pdf 61 page image

3-8 Using SetupA Quick Lock feature lets you lock your keyboard when you are away fromyour computer. This feature works only if you set a password in Setup.Setting an Initial System PasswordSet an initial password as follows:1. Select Security from the menu bar.2. Select "Set Password" by pressing Enter.3. At the prompt, enter a password up to seven characters long. Then, asprompted, reenter your password for verification. Write your passworddown and keep it in a secure place in case you forget it.4. Press Enter to return to the Security screen.5. If you want to require the password each time you start your system,move the cursor to “Password on boot” and select “Enabled.”6. If you want to require the password each time the system resumes fromSuspend mode, move the cursor to “Password on Resume” and select“Enabled.”7. Press ESC to display the Exit screen. Here you can select “Save Changesand Exit” to save your password and reboot your system.Removing a PasswordTo remove a password, press Enter at “Enter new password” and again at“Re-enter new password.” Your password clears and you are no longerprompted to enter one.You can also use the “Enter new password” and “Re-enter new pass-word” prompts to change to a new password.Quick LockThe Quick Lock feature is activated only after you have enabled a pass-word.Once the Quicklock feature is enabled, press Ctrl + Alt + Back Space tolock the keyboard. To unlock the keyboard, enter your password.When the password is removed, the keyboard cannot be locked.