NEC PX-42XM4A User Manual

Also see for 50XM5A: Supplementary guide Specifications Installation guide

Contents

NEC PX-42XM4A User Manual Manual pdf 36 page image

En-35Switching the input source quicklyThis feature enables quick input selection.After setting ON, press the CLEAR/SEAMLESS SWbutton for quick switching between the two selected inputsignals.Example: Set to switch quickly between RGB1 andRGB2.On “SEAMLESS SW” of “OPTION4” menu, select “ON”.Select “RGB1” and “RGB2”.SEL. ADJ. RETURNOPTION 4 4 / 4PREVIOUS PAGESUB. PICTUREZOOM NAVPIC FREEZESEAMLESS SWSELECT1SELECT2TEXT INSERT: BTM LFT: S BY S1: ON: RGB1: RGB2: OFFEXIT* The available sources depend on the setting of input.Information SEAMLESS SW Function* This feature will not function for certain inputcombinations. See the table on page En-15.* After switching to the selected input, please operate thisfunction.* This feature will not function during split screen mode.* When SEAMLESS SW is first turned on, or whensignals being transmitted are changed, there may be aslight delay due to signal analysis. SEAMLESS SW settingsOFF: Turns off the SEAMLESS SW function.ON: When the CLEAR/SEAMLESS SW button ispressed, input signals will switch quickly according tothe setting of SELECT1 and SELECT2.RGB/PC1RGB/PC1RGB/PC1RGB/PC1RGB/PC1RGB/PC1Side-by-Side Picture-in-PictureSELECT/FREEZEbuttonSELECT/FREEZEbuttonS BY S1RGB/PC1RGB/PC1orS BY S2RGB/PC1 RGB/PC1Side-by-Side Picture-in-PicturePOINTER buttonorZoom+/- buttonPOINTER buttonDisplaying still images in the sub screenThis feature enables display in the sub screen of still imagescaptured by pressing the SELECT/FREEZE button.Example: Setting “PIC FREEZE” to “BTM LFT”On “PIC FREEZE” of “OPTION4” menu, select “BTMLFT”.SEL. ADJ. RETURNOPTION 4 4 / 4PREVIOUS PAGESUB. PICTUREZOOM NAVPIC FREEZESEAMLESS SWSELECT1SELECT2TEXT INSERT: BTM LFT: BTM LFT: OFF: —: —: OFFEXITInformation PIC FREEZE Function* This feature does not function during split screen mode.* Digital zoom is not available while this function isoperating.* A further press of the SELECT/FREEZE button whilethis function is operating will cancel this function.* Providing a 2-screen display will cancel this function. PIC FREEZE settingsOFF: Will not show the still image.S BY S1, 2: The still images captured by pressing theSELECT/FREEZE button will be shown on the subscreen of side-by-side mode.BTM LFT~TOP LFT: The still images captured bypressing the SELECT/FREEZE button will be shownon the sub screen of picture-in-picture mode.BTM LFT~TOP LFT: Will show the entire image onthe sub screen of picture-in-picture mode.