NEC PX-42XM4A User Manual

Also see for 50XM5A: Supplementary guide Specifications Installation guide

Contents

NEC PX-42XM4A User Manual Manual pdf 26 page image

En-25Option2 Settings MenuSet “ADVANCED OSM” to “ON” in the MAIN MENU.Setting the power management for computerimagesThis energy-saving (power management) functionautomatically reduces the monitor’s power consumptionif no operation is performed for a certain amount of time.Example: Turning the power management function onOn “PWR. MGT.” of “OPTION2” menu, select “ON”.SEL. ADJ. RETURNOPTION 2 2 / 4PREVIOUS PAGEPWR. MGT.CINEMA MODELONG LIFEGRAY LEVELS1/S2PICTURE SIZEDVI SET UPCLOSECAPTIONCAPTION CONT.NEXT PAGE: ON: ON: 3: OFF: ON: OFF: LOWEXITInformation Power management function* The power management function automatically reducesthe monitor’s power consumption if the computer’skeyboard or mouse is not operated for a certain amountof time. This function can be used when using themonitor with a computer.* If the computer’s power is not turned on or if thecomputer and selector tuner are not properly connected,the system is set to the off state.* For instructions on using the computer’s powermanagement function, refer to the computer’s operatinginstructions. Power management settingsON: In this mode the power management function isturned on.OFF: In this mode the power management function isturned off. Power management function and POWER/STANDBY indicatorThe POWER/STANDBY indicator indicates the statusof the power management function. See below forindicator status and description.POWER/STANDBY indicatorPowermanagementmodeOnOffTurning the pictureback onPicture already on.Operate the keyboard ormouse. The picturereappears.POWER/STANDBYindicatorGreenRedPowermanagementoperating statusNot activated.Activated.DescriptionHorizontal and verticalsynchronizing signalsare present from thecomputer.Horizontal and/orvertical synchronizingsignals are not sentfrom the computer.Setting the picture to suit the movieThe film image is automatically discriminated andprojected in an image mode suited to the picture.[NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 576I(50Hz), 625I (50Hz), 1035I (60Hz), 1080I (60Hz) only]Example: Setting the “CINEMA MODE” to “OFF”On “CINEMA MODE” of “OPTION2” menu, select “OFF”.SEL. ADJ. RETURNOPTION 2 2 / 4PREVIOUS PAGEPWR. MGT.CINEMA MODELONG LIFEGRAY LEVELS1/S2PICTURE SIZEDVI SET UPCLOSECAPTIONCAPTION CONT.NEXT PAGE: OFF: OFF: 3: OFF: ON: OFF: LOWEXITInformation CINEMA MODEON: Automatic discrimination of the image andprojection in cinema mode.OFF: Cinema mode does not function.Reducing image retentionThe brightness of the screen, the position of the picture,positive/negative mode and screen wiper are adjusted toreduce image retention.On “OPTION2” menu, select “LONG LIFE”, then press theMENU/ENTER button.The “LONG LIFE” screen appears.SEL. ADJ. RETURNEXITLONG LIFEPLEORBITERINVERSESCREEN WIPERSOFT FOCUS: AUTO: AUTO1: OFF: OFF: OFFPLE (Peak Luminance Enhancement)Use this to activate the brightness limiter.Example: Setting “PLE” to “LOCK1”On “PLE” of “LONG LIFE” menu, select “LOCK1”.SEL. ADJ. RETURNEXITLONG LIFEPLEORBITERINVERSESCREEN WIPERSOFT FOCUS: LOCK1: AUTO1: OFF: OFF: OFFInformation PLE settingsAUTO: The brightness of the screen is adjustedautomatically to suit the picture quality.LOCK1, 2, 3: Sets maximum brightness.The brightness level decreases in the order of LOCK1, 2, 3. LOCK 3 provides minimum brightness.