95. Using the Viewer Changing Background LogoYou can change the default background logo using the Viewer feature.NOTE: File size must be 256KB or less. Maximum file resolution is 1024 x 768 for NP905 and 1280 x 800 for NP901W. File for-mats other than JPEG, BMP, non-interlaced GIF or non-interlaced PNG are not available.Preparation: Store JPEG or BMP files (JPEG, BMP, non-interlaced GIF or non-interlaced PNG files) in a USB mem-ory into the projector’s USB port.NOTE: To change highlight from the Thumbnails screen (right window) to a directory tree (left window) , press the EXIT button.To return highlight to the Thumbnails screen, press the ENTER button.1. Use the SELECT button to select a file (slide) for your background logo when displaying theThumbnail screen.2. Press the MENU button to display the THUMBNAILS menu.3. Use the SELECT button to select [LOGO] and then press the ENTER button.a confirmation dialog box will be displayed.4. Use the SELECT button to select [YES] and press the ENTER button. This completes changing a logofor the background.* Once you have changed the background from the default "NEC Projector" image (jpg) to another, you cannotreturn the logo to background even by using [RESET]. To put the default "NEC Projector" image (jpg) back in thebackground logo, repeat the above steps.The default "NEC Projector" image (jpg) file is included on the supplied User Supportware 5 CD-ROM (NP905:/Logo/necpj_bb_x.jpg and NP901W: necpj_bbwx.jpg).
