24USBLAMPSTATUSSOURCEAUTO ADJUST3D REFORMSELECT3. Projecting an Image (Basic Operation) Selecting a SourceSelecting the computer or video sourceDetecting the Signal AutomaticallyPress and hold the SOURCE button for a minimum of 1 second, the projectorwill search for the next available input source. Each time you press and hold theSOURCE button for a minimum of 1 second, the input source will change as fol-lows:COMPUTER1 → COMPUTER2 → HDMI → VIDEO → S-VIDEO → VIEWER →COMPUTER1 → ...If no input signal is present, the input will be skipped. When the input sourceyou wish to project is displayed, release the button.Using the Remote ControlPress any one of the COMPUTER 1/2, HDMI, VIDEO, S-VIDEO, VIEWER orNETWORK buttons.Selecting from Source ListPress and quickly release the SOURCE button on the projector cabinet to dis-play the Source list. Each time the SOURCE button is pressed, the input sourcewill change as follows: “COMPUTER 1/2”, “HDMI”, “VIDEO” (VCR), “S-VIDEO”,“VIEWER” (slides on a USB memory) or “NETWORK” (LAN port [RJ-45] or in-stalled USB wireless LAN unit).To display the selected source, press the ENTER button.USBLAMPSTATUSSOURCEAUTO ADJUST3D REFORMSELECTVIEWER NETWORKHDMI31 2OFF ONCOMPUTERVIDEO S-VIDEOVIEWER NETWORKHDMIPIPMAGNIFYVOLUMEPICTURE LAMP MODE ASPECTAV-MUTE 3D REFORM FREEZEID SET LENS SHIFT FOCUS/ZOOM HELPPAGEMENUL-CLICK R-CLICKEXITCOMPONENTAUTO ADJ.1 324 657 980 CLEARENTERUPDOWNPOWERIDID
