1OFF ONCOMPUTERVIDEO S-VIDEOVIEWER NETWORKHDMIPIPMENU EXITCOMPONENTAUTO ADJ.1 324 657 980 CLEARPOWERID1 2 3USBLAMPSTATUSSOURCEAUTO ADJUST3D REFORMSELECT Turning off the ProjectorTo turn off the projector:3. Projecting an Image (Basic Operation)1. Press the POWER button on the projector cabinet or thePOWER OFF button on the remote control. The [POWEROFF / ARE YOU SURE?] message will appear.2. Press the ENTER buttonAfter the projector turns off, the cooling fans keep operating fora while (Cooling-off time).The cooling fans stop operating when the projector turns offand goes into standby mode.When in standby mode, the POWER indicator will light orangeand the STATUS indicator will light green.3. After making sure that the projector is in standby mode, turnoff the Main Power switch. The power indicator will go out.About Direct Power OffThe projector has a feature called “Direct Power Off”. This fea-ture allows the projector to be turned off (even when projectingan image) using a power strip equipped with a switch and abreaker.CAUTION• Do not unplug the power cable from the wall outlet or projec-tor when the projector is powered on. Doing so can causedamage to the AC IN connector of the projector and (or)the prong plug of the power cable. To turn off the AC powersupply when the projector is powered on, use a power stripequipped with a switch and a breaker.• Do not turn off the AC power supply within 10 seconds ofmaking adjustment or setting changes and closing the menu.Doing so can cause loss of adjustments and settings and re-turn to default.USBLAMPSTATUSSOURCEAUTO ADJUST3D REFORMSELECTENTERMAGNIFYVOLUMEPICTURE LAMP MODE ASPECTAV-MUTE 3D REFORM FREEZEID SET LENS SHIFT FOCUS/ZOOM HELPPAGEMENUL-CLICK R-CLICKEXIT0 CLEARUPDOWNIDIDVIDEO INAUDIO INUSBLANAUDIO INHDMI INAUDIO INCOMPUTER /COMPONENT 2 INCOMPUTER /COMPONENT 1 INPC CONTROLMONITOR OUTAUDIO OUTS-VIDEO INAUDIO INL/MONOL/MONORRAC INUSBLAMPSTATUSSOURCEAUTO ADJUST3D REFORMSELECT( LAN)USBWIRELESSWIRELESS
