NAPCO LIBRA LIB-P432EX Programming Instructions Manual

Contents

NAPCO LIBRA LIB-P432EX Programming Instructions Manual Manual pdf 32 page image

LIBRA LIB-P432EX Series Programming Instructions NAPCO Security SystemsPage 32CS SYSTEM REPORTING CODES:1. Enter in corresponding address location(left and right digits).NOTE: Left digit is the first digit andright digit is the second digit in a twodigit CS receiver format.2. Valid entries are: 1-9, 0 and B-F.NOTE: A is not permitted.3. To disable a code leave boxes blank(•).NOTE: Dark shaded data value boxshows option not available.4. Press u to save.[Default = blank (•) blank (•) from address 0670-0682][Default = blank (•) blank (•) from address 0683-0705]CS SYSTEMREPORTING CODESADDRAlarm Restore blank (•) 0670Trouble blank (•) 0671Trouble Restore blank (•) 0672Xmitter Low Battery blank (•) 0673Xmitter Supervision blank (•) 0674Xmitter Tamper blank (•) 0675RESERVED blank (•) 0676 blank (•)Opening blank (•) 0677Closing blank (•) 0678Opening after Alarm blank (•) 0679Conditional Close blank (•) 0680Cancel blank (•) 0681Test Timer 0682ADDRESS 0670-0682 CS SYSTEMREPORTING CODESADDRESS 0683-0708ADDRTelco Fail 0683RF Rec. Trouble 0684Memory Fail 0685Low Battery 0686Panel AC Fail 0687RESERVED blank (•) 0688 blank (•)Alarm Output Superv. 0689 blAmbush 0698Panic 0699Fire 0700Auxiliary 0701Tamper 0702Fail to Open 0703Fail to Close 0704Keyfob Low Battery 0705CS SYS TEM RE P ORTIN G OPT ION S (ADDRES S 0670-0705)C S AREA & SYS TEM RE POR TIN G OPTION S (ADD RESS 0785, 0786 & 0788)[Default = blank (•) blank (•)]LEFT DIGIT (SUM RIGHT DIGIT (SUMADDRESS 0788CS AREA & SYSTEM REPORTING OPTIONS: 1. Select the desired option by circling the data values for each digit (left and right). 2. Add the data values (ex: F=15=(1+2+4+8) from the selected options. See page 23). 3. Enter in address location (left and right digits).NOTE: Dark shaded data value box shows option not available. Press u to save.CS SYSTEM REPORT OPTIONSLEFT DATAVALUES(CIRCLE )Cancel Next Test Timer on any Report 1Disable Wait for Silence (Pager Format) 2Disable Wait for Handshake on Transmit 4Disable Auto Dial Tone Detect 8RIGHT DATAVALUES(CIRCLE )CS SYSTEM REPORT OPTIONS1 Backup Report on Telco 1 & 22 Touch-tone Dialing Only *4 Touch-tone Dialing w/Rotary Backup *8 RESERVED* NOTE: If neither Touch-tone Dialingnor Touch-tone w/Rotary Backup isselected, then system defaultsautomatically to Rotary Dialing. Leaveblank (•) to select Rotary Dialing.[Default = blank (•) blank (•)]DISABLE OPENING REPORTSLEFT DIGIT RIGHT DIGIT (SUMOF DATA VALUES)blank (•)ADDRESS 0785RIGHT DATAVALUES(CIRCLE )AREA1 AREA 12 AREA 24 AREA 38 AREA 4[Default = blank (•) blank (•)]DISABLE CLOSING REPORTSLEFT DIGIT RIGHT DIGIT (SUMOF DATA VALUES)blank (•)ADDRESS 0786RIGHT DATAVALUES(CIRCLE )AREA1 AREA 12 AREA 24 AREA 38 AREA 4