NAD T775 Owner's Manual

Also see for T775: Catalog Datasheet Owner's manual Owner's manual Service manual

NAD T775 Owner's Manual Manual pdf 6 page image

INTRODUCTIONGETTING STARTEDWHAT’S IN THE BOXPacked with your T 775 A/V Receiver you will find• An AM loop antenna• A FM ribbon-wire antenna with balun• A removable AC cable (if you wish, any IEC-standard AC cable of suitable wattage may besubstituted).• The HTR 3 remote control with 4 (four) AAA batteries.• The ZR 4 zone remote control with 3V CR2025 battery.• This owner’s manual.SAVE THE PACKAGINGPlease save the box and all of the packaging in which your T 775 arrived. Should you move orotherwise need to transport your T 775, this is by far the safest container in which to do so. We’ve seentoo many otherwise perfect components damaged in transit for lack of a proper shipping carton, soplease: Save that box!INITIAL SETUPBefore you make the first connection to your T 775, you should have the arrangement of yourlistening room/home theater components and furniture mapped out, at least initially. Unfortunately, adiscussion of the vital questions of loudspeaker placement and listening/viewing positions is beyondour scope here.Suffice it to say that these two questions will influence your system’s ultimate performance every bitas powerfully as your selection of electronics and speakers. Your NAD audio specialist dealer will behappy to advise you and to recommend reference materials.CHOOSING A LOCATIONChoose a location that is well ventilated (with at least several inches to both sides and behind), andthat will provide a clear line of sight, within 25 feet/8 meters, between the T 775’s front panel and yourprimary listening/viewing position—this will ensure reliable infrared remote control communications.The T 775 generates a modest amount of heat, but nothing that should trouble adjacent components.It is perfectly possible to stack the T 775 on top of other components, but the reverse usually shouldbe avoided. Nonetheless, it is generally preferable that the T 775 stand alone. It is especially importantthat sufficient ventilation be provided. If you are contemplating on locating the T 775 within a cabinetor other furniture, consult your NAD audio/video specialist for advice on providing adequate airflow.QUICK STARTPacked with your T 775 is a Quick Start Guide that will guide you through typical setup configurationsin combination with your ancillary devices. The Quick Start Guide also features the contents of yourT 775 package as well as start up procedures.The T 775 is defaulted to the following settings:Source Audio Input Video Input Video OutputSource 1 HDMI 1 IN / Audio 1 IN HDMI 1 IN HDMI Monitor OUTSource 2 Optical 2 IN / Audio 2 IN Component Video 2 IN Component Video OUTSource 3 Coaxial 3 IN / Audio 3 IN S Video 3 IN S-Video Monitor OUTSource 4 Audio 4 IN Video 4 IN Video Monitor OUTiPod Audio 5 IN S-Video 5 IN S-Video Monitor OUTSource 7 7.1 Input Component Video 3 IN Component Video OUTFront Input Optical Front Input /Audio Front Input S-Video Front IN S-Video Monitor OUTMedia Player Audio MP inputTunerDigital input will always take precedence over analog audio input even if both are present. To modifythe above default settings and for a better understanding of source setting and combinations, pleaserefer to the section on ‘Source Setup’ of the Setup Menu discussion.By following the Quick Start Guide, you can start experiencing the performance of your new NADT 775 right away6ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ