NAD T 787 Owner's Manual

Also see for T 187: Owner's manual Service manual

NAD T 787 Owner's Manual Manual pdf 8 page image

1 DIGITAL AUDIO (COAXIAL 1-3, OPTICAL 1-3)• Connect to the corresponding optical or coaxial digital output ofsources such as CD or BD/DVD players, digital cable box, digitaltuners and other applicable components.• Coaxial and Optical digital input association is configurable via theSource Setup item of the Setup Menu OSD.DIGITAL AUDIO OUT (OPTICAL, COAXIAL)• Connect the optical or coaxial DIGITAL OUT to the correspondingdigital audio input of compatible devices such as receivers,computer soundcard or other digital processors.2 FM ANTENNA TERMINAL• The supplied wire “dipole” FM antenna will connect to the FMconnector using the supplied “balun” adapter. It will usually workbest when mounted on a vertical surface such as a wall, with armsfully outstretched forming a horizontal “T” perpendicular to theorigin point of the signal.AM ANTENNA TERMINALThe AM loop antenna supplied with the T 787 (or a suitablereplacement) is required for AM reception.• Connect the supplied AM loop antenna to these terminals. If anexternal AM antenna is used, make connections to the AM and GNDterminals in accordance with the instructions supplied with theantenna.• Testing different positions for the antenna may improve reception;vertical orientation will usually produce the best results. Antennaproximity to large metal objects (appliances, radiators) may impairreception, as will as attempts to lengthen the wire to the loop.• Refer also to the item about ASSEMBLING THE LOOP ANTENNA atthe LISTENING TO AM/FM RADIO section of the OPERATION page.3 AUDIO 1-6/VIDEO 1-3/S-VIDEO 1-3• These comprise the T 787’s other sets of principal input. Connectthese audio and video input ports to corresponding output ports ofcompatible source components such as DVD players, CD players orcable/satellite boxes.• AUDIO 5 and S-VIDEO 3 are the assigned default ports for the audio/video output of the separately sold NAD IPD (NAD IPD Dock foriPod) 1, NAD IPD 2 and later variants.IDENTIFICATION OF CONTROLSREAR PANEL© NAD T 787AUDIO 6 AUDIO 5 OUT AUDIO 4 IN OUT AUDIO 3 IN AUDIO 2 AUDIO 1 ZONE 2RAUDIOLZONE 4 ZONE 3 ZONE 2SUBW SUBW 2SUBW 1 CENTERSURR-BSURRFRONTR LAUDIOPRE-OUTCENTERSURR-BSURRFRONTAUDIO 6 AUDIO 5Y PB PRY3 2 1 PB PRY PB PRY PB PROUT AUDIO 4 INZONE 4 ZONE 3 ZONE 2OUT AUDIO 3 IN AUDIO 2 AUDIO 1 ZONE 2HDMI IN 6 HDMI IN 5XMDAB230V VERSION ONLYANTENNAFM GND AMHDMI IN 4HDMI IN 33 2COAXIAL OPTICAL1 3 2 1HDMI IN 2 HDMI IN 1 HDMI OUT 2 HDMI OUT 1SWITCHEDPOWER+12V TRIGGEROUT 1 OUT 2INOUT 3OUT 2OUT 1IN OUT 3RS-232ONAC OUTLET 120V ~ 60Hz120W 1A MAXSWITCHEDAC OUTLET 230V ~ 50Hz120W 0.5A MAXOUTETHERNETMPDOCKDATA PORTOUTR7.1 CH INPUTLRAUDIOLS-VIDEOIN3 21VIDEOMONITOROUTVIDEOHDMIDIGITALAUDIO230V VERSION ONLY1 2 3 4 5 615 16 197 8 9141710 1211 1318ATTENTION!Please make sure that the T 787 is powered off or unplugged from the mains power source before making any connections. It is also advisable to powerdown or unplug all associated components while making or breaking any signal or AC power connections.8ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ