INTRODUCTIONgetting StartedUNPACKING AND SETUPwhat’S in the boxPacked with your C 165BEE you will find:• The SR 8 remote control with 2 (two) AA batteries• This owner’s manual• A detachable AC power cordSave the packagingPlease save the box and all of the packaging in which your C 165BEEarrived. Should you move or otherwise need to transport your C 165BEE,this is by far the safest container in which to do so. We’ve seen too manyotherwise perfect components damaged in transit for lack of a propershipping carton, so please: Save that box!chooSing a locationChoose a location that is well ventilated (with at least several inches toboth sides and behind), and that will provide a clear line of sight, within23 feet/7 meters, between the C 165BEE’s front panel and your primarylistening/viewing position. This will ensure reliable infrared remote controlcommunications. The C 165BEE generates a modest amount of heat, butnothing that should trouble adjacent components. It is perfectly possible tostack the C 165BEE atop other components, but the reverse usually shouldbe avoided.noteS on inStallationYour NAD C 165BEE should be placed on a firm, level surface. Avoidplacing the unit in direct sunlight or near sources of heat and damp. Allowadequate ventilation. Do not place the unit on a soft surface like a carpet.Do not place it in an enclosed position such a bookcase or cabinet thatmay impede the air-flow through the ventilation slots. Make sure the unit isswitched off before making any connections.The RCA sockets on your NAD C 165BEE are colour coded for convenience.Red and white are Right and Left audio respectively.Use high quality leads and sockets for optimum performance and reliability.Ensure that leads and sockets are not damaged in any way and all socketsare firmly pushed home.If the unit is not going to be used for some time, disconnect the plug fromthe AC socket.Should water get into your NAD C 165BEE, shut off the power to the unitand remove the plug from the AC socket. Have the unit inspected by aqualified service technician before attempting to use it again.do not remove the cover; there are no uSer-ServiceablepartS inSide.Use a dry soft cloth to clean the unit. If necessary, lightly dampen the cloth withsoapy water. Do not use solutions containing benzol or other volatile agents.ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ