NAD C165BEE Owner's Manual

Also see for C165BEE: Specifications Owner's manual Service manual

Contents

NAD C165BEE Owner's Manual Manual pdf 13 page image

OVERALL SPECIFICATIONSline level inputInput impedance (R and C) 100 kΩ+ 320 pFInput sensitivity 158 mV (ref. 500 mV out)Maximum input signal >9 VSignal/Noise ratio, A-weighted >108 dB (ref. 500 mV in 500 mV out, volume set to unity gain)>106 dB (ref. 2V out, Volume maximum)Channel Separation >80 dB (ref. 1 kHz/10 kHz)Frequency response ± 0.1 dB (ref. 20 Hz - 20 kHz, Tone defeat ON)± 0.5 dB (ref. 20 Hz - 20 kHz, Tone defeat OFF)Frequency response (subwoofer out) 100 Hz (ref. -3 dB)outputOutput impedance - Pre out 75 ΩTape out Source Z + 440 ΩSub out 100 ΩHeadphones 10 ΩMaximum output level - Pre out >10 V into 600 ΩTape out >10 V into 10 kΩ loadSub out >7 V into 1 kΩ loadHeadphones >5 V into 600 Ω>2 V into 32 ΩTHD (CCIF IMD, DIM 100) >0.001 % (ref. 20 Hz – 20 kHz, 2V out)tone controlSTreble ± 5 dB at 10 kHz (ref. 2V in 500 mV out)Bass ± 5 dB at 100 Hz (ref. 2V in 500 mV out)power conSumptionNormal operation 21 WStandby mode <0.8 WPHONO INPUTInput impedance - MC 40,100,600 Ω (R)1 nF (C)MM 47 kΩ (R)220,300,400 pF (C)Input sensitivity - MC 0.15 mV (ref. 1 kHz 500 mV out)MM 2.63 mV (ref. 1 kHz 500 mV out)Input overload - MC 1 mV/10 mV/100 mV (20 Hz/1 kHz/20 kHz)MM 16 mV/147mV/1.4V (20 Hz/1 kHz/20 kHz)Gain - MC in - Tape out 59.8 dB1 (ref. 1 kHz, 10 kΩ load)MM in - Tape out 36.5 dB (ref. 1 kHz, 10 kΩ load)THD (CCIF IMD, DIM 100) <0.009 % (ref. 20 Hz – 20 kHz, 5 Vrms Tape out)Signal/Noise ratio, IHF A-weighted - MC >78 dB (ref. 0.5 mV)MM >86 dB (ref. 0.5 mV)RIAA response accuracy ± 0.5 dB (ref. 20 Hz – 50 Hz)± 0.3 dB (ref. 50 Hz – 20 kHz)Infrasonic filter 10 Hz (at -3 dB)5 Hz (at -14 dB)Channel Separation - MC >60 dB (ref. 1 kHz/10 kHz)MM >60 dB (ref. 1 kHz/10 kHz)DIMENSION AND WEIGHTDimensions (W x H x D) 435 x 80 x 286 mm (Net)435 x 99 x 315 mm (Gross)Net weight 6 kgShipping weight 7.8 kglegend:1 Measured with 30 Ω generator impedance, MC input resistance set to 600 Ω. Measured with 10 Ω input termination. Measured with MM cartridge connected (600mH+ 600 Ω) Gross dimensions include feet, volume control and extended rear panel terminals.Specifications are subject to change without prior notice. For updated documentation and features, please log onto www.NADelectronics.com for the latestinformation about C 165BEE.REFERENCESpecificationS1ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

/ 14

Related manuals for NAD C165BEE