Makita UC3530A Instruction Manual

Also see for UC3030A: Spare parts list Instruction manual Owner's and safety manual Instruction manual Instruction manual

Contents

Makita UC3530A Instruction Manual Manual pdf 16 page image

16cutting a branch ensure that no other branch istouched.- When crosscutting a trunk be aware of the trunks nextto it. It is recommended to use a saw jack.Transport and storage- Carry the electric chain saw with the tubular handle.The saw bar indicates backwards. Never carry ortransport the electric chain saw with the chainrunning.- Never carry the saw by the power cord. Do notdisconnect the plug by pulling on the power cord.- When changing your position during work switch ofthe electric chain saw and actuate the chain brake inorder to prevent an inadvertent start of the chain.- When transporting the electric chain saw over longdistances the power supply plug must be pulled outand the bar protection cover, included in the delivery,must be applied. (Fig. 20)- Ensure safe positioning of the electric chain sawduring car transportation to avoid oil leakage.- Store the saw in a secure, dry, lockable room out ofreach of children. It must not be stored outdoors.- For storing the electric chain saw over a long periodof time or shipping it the oil tank must be completelyemptied.- Only use approved and marked containers fortransporting and storing chain oil.Maintenance- For performing maintenance works switch ofthe electric chain saw, pull out the power supplyplug and secure it. (Fig. 21)- Before starting to work, always make sure that thesaw is in safe working order, in particular the chainbrake and run-out brake. Make sure that the sawchain is always sharpened and tightened correctly.(Fig. 22)- Have the chain brake and run-out brake inspectedregularly (see “Chain brake, run-out brake”).- Regularly check the cable to the power supply fordamage of the covering.- Regularly clean the electric chain saw.- If the plastic case is damaged, have it immediatelyrepaired by a skilled person.- Regularly check the tank cap for tightness.- Do not use the saw if the ON/OFF switch is defective.Have it repaired by a qualified person.Observe the accident prevention instructionsissued by the competent trade federations andinsurance companies.Do not perform any modifications on the electricchain saw. You will endanger your safety.Perform only the maintenance and repair worksdescribed in the instruction manual. All other worksmust be carried out by the MAKITA service. (Fig. 23)Use only original MAKITA spare parts andaccessories.Applying spare parts which are not original MAKITAparts or accesories and bar/chain combinationsor lengths results in a high risk of accidents. Foraccidents and damage resulting from using sawingdevices or accesories which have not been approvedwe cannot accept any responsibility.First aid (Fig. 24)For the event of a possible accident, please, make surethat a first aid box is always immediately available closeby. Immediately replace any items used from the firstaid box.Should you ask for help, please, give the followinginformation:- place of accident- what happened- number of injured persons- kind of injuries- your name.NOTEIndividuals with poor circulation who are exposed toexcessive vibration may experience injury to bloodvessels or the nervous system.Vibration may cause the following symptoms tooccur in the fingers, hands or wrists: “Falling asleep”(numbness), tingling, pain, stabbing sensation,alteration of skin colour or of the skin. If any of thesesymptoms occur, see a physician!