Lenovo s200 Hardware Maintenance Manual

Also see for IdeaPad S200: User guide User guide Notice Manual User guide

9. Align the tab 1 on the right side of the front audio and USB assembly bracket with the right side of thecorresponding slot in the chassis. Then pivot the front audio and USB assembly bracket inwards until itsnaps into position on the left side.Figure23. Installing the front audio and USB assembly bracket10. Install the screw to secure the front audio and USB assembly bracket to the chassis.11. Reconnect the front audio and USB assembly cables to the front audio connector and the front USBconnector on the system board. See “Parts on the system board” on page 34.12. Install the front bezel. See “Replacing the front bezel” on page 83.What to do next:• To work with another piece of hardware, go to the appropriate section.• To complete the installation or replacement, go to “Completing the parts replacement” on page 109.Replacing the card readerAttention: Do not open your computer or attempt any repair before reading and understanding the Chapter1 “Read this first: Important safety information” on page 1.To replace the computer handle, do the following:1. Remove any media from the drives and turn off all connected devices and the computer. Then,disconnect all power cords from electrical outlets and disconnect all cables that are connected to thecomputer.2. Remove the computer cover. See “Removing the computer cover” on page 82.3. Remove the front bezel. See “Replacing the front bezel” on page 83.4. Locate the card reader. See “Computer components” on page 31.5. Disconnect the card reader cable from the system board.Note: Ensure that you note the location of the cable when you disconnect the cable from the systemboard.Chapter 9. Installing or replacing hardware 91

/ 138

Related manuals for Lenovo IdeaPad S200

Lenovo s510 User Manual

Lenovo ThinkCentre M83z User Manual

This manual is suitable for:

IdeaPad S200

Lenovo s200 Hardware Maintenance Manual

Product

Learn More

Legal