Energy SavingThe Energy Saving page provides power settings for the px4-300d.Power Down DrivesClick the Power Down Drives drop-down menu to select how much idle time should be allowed to elapsebefore the px4-300d powers down the drives. Drives automatically power back up when the px4-300daccesses them. You may notice a slight delay when the drives are accessed.BrightnessTo adjust the brightness of the lights on the px4-300d, set the Indicator Brightness to High, Medium, orLow.Wake On LANWake On LAN powers on your px4-300d when a specific signal is sent over the network. Additionalsoftware may be required to send the Wake On LAN signal to your device.1. Check the Wake On LAN checkbox to enable Wake On LAN.2. Click Apply to save your changes.Creating A Power ScheduleYou can create a power schedule to turn your px4-300d on and off. Power off and Power on functions canbe scheduled as one-time events, or recurring events. When you create a power schedule, you can set theday and time to power down the device. In addition, you can optionally set power on times.1. Check the Enable device power schedule checkbox.2. Select the days for your px4-300d to power on or off.3. Set the power schedule time in both hours and minutes (HH:MM), and specify AM or PM.4. Click Apply to save your changes.Hardware ManagementEnergy Saving 138
