Using docking stations or port replicators with APM-supported ThinkPadmodelsOn APM-supported ThinkPad models, Windows 2000 does not support dynamic docking orundocking with docking stations or port replicators. Most of the devices located in thedocking station or port replicator can only be configured when the computer is turned on orrestarted. PC Card, CardBus, and USB devices are exceptions to this restriction. Hotinsertion and removal of these devices in the docking station or port replicator are supported.The following tables illustrate the type of docking device support on Windows 2000Professional for APM-supported ThinkPad models:ThinkPad 760Xx and 765D/L ThinkPad 770HotDockWarmDockColdDockHotDockWarmDockColdDockSelectaDock-IIIDE device - - ¸ - - ¸ISA card(ISA Plug-and-Play, onlyon startup or restart)- - ¸ - - ¸16-bit PC Card - - ¸ - - ¸CardBus PC Card - - No support - - No supportPCI card - - ¸ - - ¸GamePort - - ¸ - - ¸SCSI device - - ¸ - - ¸SelectaDock-IIIIDE device - - ¸ - - ¸ISA(ISA Plug-and-Play, onlyon startup or restart)- - ¸ - - ¸16-bit PC Card - - No support - - ¸CardBus PC Card - - ¸ - - ¸PCI device - - ¸ - - ¸USB device - - ¸ - - ¸Game port - - ¸ - - ¸SCSI device - - ¸ - - ¸PC Card Enabler16-bit PC Card - - No support - - ¸CardBus PC Card - - ¸ - - ¸PC Card Enabler withAdvanced EtherJet Port16-bit PC Card - - - - - ¸CardBus PC Card - - - - - ¸Ethernet port - - - - - ¸ThinkPad 380E, 380 X, 560E,and 560XHotDockWarmDockColdDockEnhanced Port Replicator16-bit PC Card - - ¸
