Lenovo ThinkPad 380E Setup Manual

Also see for ThinkPad 390: Installation guide User guide

Contents

Installing the IBM DVD hardware decoder device driver for Windows 2000(ThinkPad 770, 770ED, 770X, and 770Z models)To install the DVD hardware decoder device driver for Windows 2000, it is required that theIBM ThinkPad 770 DVD and Enhanced Video Adapter (P/N 10L1228) be installed.The DVD hardware decoder enables you to play DVDs on the ThinkPad models 770, 770E,770X, and 770Z under Windows 2000 Professional. However, the DVD decoder devicedriver is not included with Windows 2000. After this device driver is installed in yourcomputer, you can enjoy smooth DVD playback on the above computer models. Thestandard Windows 2000 DVD player application can be used in combination with the IBMDVD hardware decoder to play DVDs on your ThinkPad computer.Note that the Mediamatics DVDExpress DVD Player application is not compatible withthe IBM DVD hardware decoder device while running Windows 2000. This combinationis not supported under Windows 2000. To play DVDs through the IBM DVD hardwaredecoder, use the Microsoft standard DVD player application (DVDPLAY.EXE) included inWindows 2000 Professional.To install this device driver, follow these instructions below:1. Verify that the IBM ThinkPad 770 DVD and Enhanced Video Adapter is installed onyour computer.2. Turn on your computer, and then logon to Windows 2000 Professional with anAdministrator user account.3. Click: Start ? Settings ? Control Panel4. Double-click the System applet. After the “System Properties” windows opens click the'Hardware' tab.5. Click [Device Manager...].6. Under "Other devices", double-click 'Multimedia Controller" device. This will open theProperties window for the device.7. Click the 'Driver' tab; then click [Update Driver...].8. Click [Next].9. Select "Search for a suitable driver..." option; then click [Next].10. Select "Specify a location, " and then click [Next].11. Insert the disk labelled “MPEG-2 decoder for Windows 2000” into the diskette drive.12. Type: A:\ in the "Copy manufacture's file from:” box, where A is the drive letter assignedto the diskette drive.13. Click [OK].14. Click [Next] when the "Device Driver Wizard" has found a suitable driver for the device.15. The "Digital Signature Not Found" window will open. Click [Yes] to continue theinstallation. During the install, you might be asked to insert the Windows 2000Professional CD to copy additional files. Do so when prompted.16. After the files are copied to your computer and the device driver is installed, click[Finish].17. Click [Close] in the Properties window for the IBM DVD decoder card device. Thedevice driver is now installed.18. To verify device driver installation, open Device Manager and under "Sound, video, andgame controllers", the IBM DVD decoder card will be listed. If it is not, follow steps 1through 15.