Menu
Lenovo RackSwitch G8264 Installation Manual
Also see for RackSwitch G8264: Installation guideProduct guideProduct guideApplication guideCommand reference
                                                                                      |
© Copyright 2015 Lenovo Chapter 3: Installing G8264 Hardware and Options 31Required ToolsYou need the following tools or equipment to install the G8264:• Standard flat-blade screwdriver• #2 Phillips screwdriver• Electrostatic discharge wrist strapPackage ContentsThe basic G8264 package contains the following items:• One RackSwitch G8264 unit with front-to-rear or rear-to-front airflow• One two-post mounting kit for standard 19” equipment racks:– Two mounting brackets– Screws to attach brackets to the switch unit– Screws to attach the switch unit to the equipment rack• One console cable kit that includes:– One Mini-USB to RJ-45 serial cable– One Category 5 patch cable– One DB9 to RJ-45 adapter• Two AC power cords• One Documentation CD, which includes the Systems Information document• One Warranty Information document• One Important Notices document• One Environmental Notices CDEnvironmental RequirementsThis section describes the basic environmental requirements for the G8264. Makesure the location where you install the switch meets the following requirements:• Install the switch unit in a dry, clean, well-ventilated area.• Provide adequate space in the front and back of the switch unit, to ensure properair flow.• Make sure that an adequate grounded power supply is within reach of the switchunit.• Make sure that twisted-pair cable is routed away from power lines, fluorescentlighting fixtures and other sources of electrical interference. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved