Menu
Lenovo RackSwitch G8264 Installation Manual
Also see for RackSwitch G8264: Installation guideProduct guideProduct guideApplication guideCommand reference
                                                                                      |
20 RackSwitch G8264 Installation GuideManagement PanelMini-USB Serial Console PortThe mini-USB port on the front management panel is available for switch consolemanagement. The port operates using RS-232 serial communications. A compatibleconsole cable kit is included with the switch.To connect a computer or terminal to the switch using the included kit, first connectthe console cable to the mini-USB port on the front panel. Connect one end of theCategory 5 patch cable to the RJ-45 port on the console cable, and the other end ofthe patch cable to the RJ-45-to-DB9 adapter (see the following illustration).Figure 4. Console cable connectionsIf using cables other than those from the included kit, ensure that they arecompatible with the port pin assignments shown in the following tables.Table 1. Switch mini-USB port connector pin assignmentsPin Number Function1 No connect2 SIN (RS-232 Input)3 SOUT (RS-232 Output)4 GND (Ground)5 No connectTable 2. Console cable RJ-45 port connector pin assignmentsPin Number Function1 RTS (Request To Send)2 DTR (Data Terminal Ready)3 TxD (Transmit Data)4 GND (Ground)5 GND (Ground)6 RxD (Receive Data)7 DSR (Data Set Ready)8 CTS (Clear To Send)To PCTerminalToSwitchRJ-45 AdapterCategory 5Patch CableSwitchConsole Cable |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved