3 Setup Options80 Keysight U1731C/U1732C/U1733C User’s GuideChanging the user high/low limit valuesThis setting is used with the Limit comparison function (page 58). There are 16variable user sets available.Use this Setup item to change the high and low limits of each variable user set.Table 3-4 shows the user default limit values for each set.NOTE The low limit can be set from 0 to less than or equal to the high limit, and thehigh limit can be set from more than or equal to the low limit to less than orequal to the maximum display count (19999).Parameter Range Default setting– H(01 to 16) or– L(01 to 16) 0 to 19999 See Table 3-4Table 3-4 Default user high/low limit valuesSet High limit (H) Low limit (L)U01 1000 900U02 1200 1080U03 1500 1350U04 1800 1620U05 2200 1980U06 2700 2430U07 3300 2970U08 3900 3510U09 4700 4230U10 5600 5040U11 6800 6120
