Features and Functions 2Keysight U1731C/U1732C/U1733C User’s Guide 57From the LCR meter’s display, you can view the following statistical data for anyset of readings:– Max: highest reading since the static recording mode was enabled– Min: lowest reading since the static recording mode was enabled– Avg: average or mean of all readings since the static recording mode wasenabled– MaxMinAvg: present reading (actual input signal value)Press the key for more than 1 second to enter the static recording mode.Figure 2-14 Using the Rec functionPress again to cycle through the Max, Min, Avg, or MaxMinAvg (present) inputvalues.To exit this mode, press and hold the key for more than 1 second.RecHoldR ecHold>1sRecHoldRecHoldNOTE – Static recording captures only stable values and updates the memory; it willnot record any overload ( ) value for any of the LCR functions. In addition,the LCR meter will not record values below 50 counts in capacitancemeasurement.– Static recording is only available in manual ranging; therefore, activationwhile in autoranging will automatically set the LCR meter to manual ranging.
