Keysight M9380A Startup Manual

Also see for M9380A: Manual Startup guide

Contents

Keysight M9380A Startup Manual Manual pdf 26 page image

Step 4: Install the ModulesM9310A PXIe Source Output Front Panel FeaturesFor parameter limits and specifications on the M9310A connectors, see "M9380A Block Diagram Reference Tablefor M9310A " on page 28.Connector Description100 MHz BPOutThis SMB male connector outputs a 100 MHz signal from the chassis backplane.100 MHz In This SMB male connector inputs a 100 MHz reference signal from the 100 MHz Out con-nectors of the Keysight M9301A PXIe Synthesizer.100 MHz Out This SMB male connector outputs the 100 MHz Reference signal.Trig 1 This SMB male connector accepts the Pulse RF Blanking Input Trigger.Trig 2 This SMB male connector is the Source Settled Output Trigger.Sync This connector is intended for future use.RF In This SMA female connector inputs the RF signal from the Keysight M9301A PXIe SynthesizerRF Out connector.RF Out This SMA female connector outputs a CW RF signal of 1 MHz to 3 GHz or 6 GHz.To avoid damage, do not exceed 1 Watt (25 VDC) reverse power into the M9310A RF Out connector.26 Keysight M9380A PXIe CW Source