Keysight M9380A Startup Manual

Also see for M9380A: Manual Startup guide

Contents

Keysight M9380A Startup Manual Manual pdf 17 page image

Step 4: Install the ModulesThis is the default selection.b. Click on Finish.c. Wait for the system to restart.damage may result.)b. Click on Finish.c. Shut down the remote controller PC. Use Start >Shut down.d. Power down the chassis.e. Power up the chassis.f. Power up the remote controller PC.Step 4: Install the ModulesPXI hardware does not support "hot-swap" (changing modules while power is applied to the chassis) cap-abilities. Before installing or removing a module to/from the chassis, power off the chassis to prevent damageto the module.These modules can be used in a chassis with PXIe or PXI-H chassis slots.Recommended best practices to ensure proper and safe module operatingconditionsl Ensure proper chassis air flow is maintainedl Select a chassis that provides thermal protection if fans become inoperable or forced air cooling isobstructedl Use slot blockers (Keysight model Y1212A, 5 per kit) and EMC filler panels in empty module slots toensure proper operating temperatures. Keysight chassis Keysight M9018A chassis and slot blockersoptimize module temperature performance and reliability of test.l Set chassis fans to high or auto. Do not disable fans.l Position chassis to allow plenty of space around chassis air intake and fan exhaust.l At environment temperatures above 45 °C, set chassis fan speed to high.Keysight M9380A PXIe CW Source 17