Keysight M9380A Startup Manual

Also see for M9380A: Manual Startup guide

Contents

Keysight M9380A Startup Manual Manual pdf 15 page image

Step 3: Install the SoftwareStep 3: Install the SoftwareSystem RequirementsTopic Windows 7 RequirementsOperating system Windows 7 (32 bit and 64 bit), WES7Processor speed 1 GHz 32-bit (x86), 1 GHz 64-bit (x64), no support for Itanium64Available memory 4 GB minimum (8 GB recommended for 64-bit operating systems)2Available disk space 13 1.5 GB available hard disk space, includes:l 1 GB available for Microsoft .NET Framework 3.5 SP1 24l 100 MB for Keysight IO Libraries SuiteVideo Support for DirectX 9 graphics with 128 MB graphics memory recommended (Super VGA graphics is supported)Browser Microsoft Internet Explorer 7.0 or greater1 This is the required disk space for installation. Typically, less disk space is required for operation than is required for installation.2 .NET Framework Runtime Components are installed by default with Windows 7 and Vista. Therefore, you may not need this amount of diskspace.Hardware RequirementsTopic RequirementsChassis PXIe or PXI-H chassis slotControllers A PXI or PXI Express embedded controller or remote controller (external PC connected to the chassis by a PCI-to-PXIinterface) is required.Embedded con-trollerKeysight M9036A or M9307A or an embedded controller that meets the following requirements:l PXIe system controller (PXI-1 embedded controllers are not compatible)l Utilize a 2x8, or 4x4 PXIe system slot link configuration.l Run one of the operating systems listed in System Requirements (above).Remote con-troller(for Keysight M9018A chassis use only) A PC running one of the operating systems listed in System Requirementsabove and a Keysight M9021A Cable Interface x8 with one of the following PC interface options:l Keysight M9045B PCIe ExpressCard Adaptor x1, with cable (for a laptop PC)l Keysight M9048A PCIe Desktop Adaptor x8, with cable (for desktop PCs)Power up the ControllerIf you are using a remote controller and you have installed the interface cable, you must power up the chassisBEFORE you power up the PC. When you power down your chassis, Shut Down the PC BEFORE you powerdown the chassis.If you are using an embedded controller, complete the following steps:Keysight M9380A PXIe CW Source 15