Keithley 2790 User Manual

Also see for 2790: Reference manual

Contents

Keithley 2790 User Manual Manual pdf 29 page image

2-8 Model 2790 SourceMeter® Switch System User’s ManualRemote programmingAs shown in Table 2-1, the amplitude command is used to set the outputs of the sources.Notice that the channel number of the V-source (28) and I-source (27) must be included inthe command string.Table 2-1Commands to set amplitude for V-source and I-sourceCommands Description DefaultSOURce:VOLTage[:LEVel][:IMMediate][:AMPLitude] , Set V-source output; 50 to 500 (V). = (@128) Slot 1= (@228) Slot 250V[:AMPLitude]? Query V-source output level.SOURce:CURRent[:LEVel][:IMMediate][:AMPLitude] , Set I-source output; 0 to 50 (mA). = (@127) Slot 1= (@227) Slot 20.001A[:AMPLitude]? Query I-source output level.Note: Selecting an ohms calculation enables source tracking. Selecting any other math function disablessource tracking.