Kane Hawk5000 Operator's Manual

Contents

Table Of Contents
general information
REQUIREMENTS
electromagnetic compatibility
GETTING STARTED WITH THE HAWK 5000
ON-SITE
CONFIRMING CORRECT OPERATION
THE PHASER
USING PULSE INPUT DEVICES
downloading data
troubleshooting
technical information
WORKING CONDITIONS
CONNECTIONS
CE MARKING
GLOSSARY

Kane Hawk5000 Operator's Manual Manual pdf 17 page image

HAWK 5000 OPERATOR MANUALKANE INTERNATIONAL LIMITED 17CONNECTIONSLooking at the back of the HAWK from left to right the connections are:Mains Power via an IEC connectorPC serial interface via a 9 pin Cannon 'D' type.2 off pulse input via 6 pin circular DIN connectorsthe phaser input3 off current transformer inputs via 5 pin DIN connectors.The serial interface connections are:12 TX data3 RX data45 signal ground6 RTS handshake out78 CTS handshake inThe Pulse input connections are:1 Low frequency input2 Ground3 High frequency input4 +12V DC power out5 Not connectedThe current transformer input connections are:1 AC current in2 aux.3 AC current return4 +V aux.5 -V aux.

/ 19

Related manuals for Kane Hawk5000