Kane Hawk5000 Operator's Manual

Contents

Kane Hawk5000 Operator's Manual Manual pdf 16 page image

HAWK 5000 OPERATOR MANUALKANE INTERNATIONAL LIMITED 16WORKING CONDITIONSSupply voltage(240V model) 180 to 260 V AC(120V model) 90 to 130 V AC(not to exceed +10% of the nominal voltage)Supply Frequency 40 Hz - 65HzMax. power 20 VAMax. Relative Humidity 80% for temperature up to 31°C decreasing linearly to50% relative humidity at 40°CMain Fuse 100 mA Anti-surgeAmbient Temperature 5 to 40 degrees CAltitude Indoor use up to 2000mProtection IP20Pollution Degree 2DimensionsSize 282 x 222 x 64 mmWeight 1.8 Kg (without accessories)Logging period Programmable: 2 secs to 2 hoursMeasurement period 2 secs to 11 secs(depends on logging period)Sample rate 10000 samples per secondPHASERPower 9 volt battery( PP3 type)Size 200 x 35 x 31 mmMAINTENANCE AND CLEANING INSTRUCTIONSThe jaw faces of the current clamps must always be clean. Clean them regularly and keepthem lightly oiled to avoid oxidation.Do not leave the clamp in damp conditions and never expose it to running water.Clean the handle and casing with a cloth moistened with a light detergent, use a cloth slightlymoistened with clean water to remove residues. Dry with clean soft cloth, never expose theclamp to running water.After cleaning leave overnight in a warm room to ensure that all moisture evaporates.

/ 19

Related manuals for Kane Hawk5000