KBC ESML8P-PC2 User Manual

Contents

KBC ESML8P-PC2 User Manual Manual pdf 84 page image

Manual-ESML8P-PC2_Series-Rev1211Copyright © KBC Networks Ltd. Page 84 of 110 www.kbcnetworks.com• Priority: Click the pull-down menu to choose the priority of power supplying.• Port Limit (<15400) mW: Users can key in the power limit value under 15.4 watts.• Mode: Displays the operating mode of the port.• Current (mA): Displays the operating current of the port.• Voltage (V): Displays the operating voltage of the port.• Power (mW): Displays the power consumption of the port.• Determined Class: Displays the class of the connected PD.• And then, click Apply to carry settings into effect.5.2.27 Factory DefaultClick the Reset button to reset the switch back to factory defaults. Before resetting, you can tickthe checkboxes to keep the current IP address and user name/password.Factory Default interface5.2.28 Save ConfigurationSave all changes you have made in the system. To ensure the configurations you have made willbe implemented the next time you power on the switch, remember to click the Save button tosave all configurations into the flash memory.Save Configuration interface