KBC ESML8P-PC2 User Manual

Contents

KBC ESML8P-PC2 User Manual Manual pdf 64 page image

Manual-ESML8P-PC2_Series-Rev1211Copyright © KBC Networks Ltd. Page 64 of 110 www.kbcnetworks.com• Max Age: Displays the configured aging time of the switch.• Hellow Time: Displays the configured Hellow Time.• Forward Delay: Displays the configured forward delay time.RSTP System Configuration interfacePort ConfigurationThis tab offers the interface for RSTP port configuration where you can assign parameters to eachport. The rapid spanning tree protocol will have the port with the higher priority in forwardingstate and block other ports to make certain that there is no loop in the LAN.• Scroll the list box to select a port for configuration.• Path Cost: The path cost can be managed. Enter a number in the range of 1 to200,000,000.• Priority: Port Priority. Give the value to decide which port should be blocked by setting itspriority. Enter a number between 0 and 240. The entered value must be a multiple of 16.• Admin P2P: The rapid state transitions possible within RSTP are dependent upon whetherthe port concerned can only be connected to exactly another bridge (i.e. it is served by apoint-to-point LAN segment), or can be connected to two or more bridges (i.e. it is servedby a shared medium LAN segment). This function allows the P2P states of the link to bemanipulated administratively. True means the port is regarded as a point-to-point link.False means the port is regarded as a shared link. Auto means the link type is determinedby the auto-negotiation between the two peers.