KBC ESML8P-PC2 User Manual

Contents

KBC ESML8P-PC2 User Manual Manual pdf 61 page image

Manual-ESML8P-PC2_Series-Rev1211Copyright © KBC Networks Ltd. Page 61 of 110 www.kbcnetworks.comNote:1. A trunk port doesn’t insert tags into an untagged frame, and therefore the untagged VID fieldis not available.2. It’s not necessary to type ‘1’ in the tagged VID field. The trunk port will forward the frames ofVLAN 1.3. The trunk port has to be connected to a trunk/hybrid port of the other switch. Both thetagged VID of the two ports have to be the same.- Hybrid Link: A segment which consists of Access and Trunk links. The hybrid port hasboth the features of the access and trunk ports. A hybrid port has a PVID belonging toa particular VLAN, and also forwards the specified tagged-frames for the purpose ofVLAN communications between switches.Note:1. It’s not necessary to type ‘1’ in the tagged VID field. The hybrid port will forward the framesof VLAN 1.2. The trunk port has to be connected to a trunk/hybrid port of the other switch. Both thetagged VID of the two ports have to be the same.• Untagged Vid: This field is available when the Link Type pull-down menu is set on AccessLink and Hybrid Link. Assign a number in the range between 1 and 4094.• Tagged Vid: This field is available when the Link Type pull-down menu is set on TrunkLink and Hybrid Link. Assign a number in the range between 1 and 4094.• Click the Apply button on the tab to have the port configuration take effect.• And then you can see the link type, untagged VID, and tagged VID information of eachport shown in the table on the screen.