Kärcher K 6.200 Service Manual

Also see for K 6.200: Manual Original instructions

Kärcher K 6.200 Service Manual Manual pdf 6 page image

6 English 5.906-591.0 Rev. 00 (01/14)– 3 piston axial pump with stainless steel piston– Cylinder head made of brass / aluminium– Pressure relief system– Electric motor with thermal motor protection switch.– Retractable push handle– Carrying handle– Nozzle racks for triple nozzle and rotor nozzle– Transport bracket for surface cleaner– Cable clamp– Rubber strap as transport restraint for power cable andhigh-pressure hose (not with CX-version)– Can be operated in a vertical or horizontal position– Additional spray lance holder with fixation for transpor-tation– Metal sieve with water connectionThis high pressure cleaner is designed for domestic useonly.– for cleaning machines, vehicles, buildings, tools, fa-cades, terraces, gardening tools, etc. by means of ahigh-pressure water jet (if necessary, with additionalcleaning agents).– with accessories, replacement parts and cleaningagents approved by KÄRCHER. Please observe the in-formation accompanying the cleaning agents.This service manual describes the appliance family:– K 6.200– K 7.200– K 7 CompactThe appliances only differ in the pump capacity.Safety devices serve to protect the user and must not berendered in operational or their functions bypassed.Observe safety information in the chapters!This lock locks the lever of the trigger gun and prevents theinadvertent start of the appliance.The overflow valve prevents the permissible working pres-sure from being exceeded.If the lever on the trigger gun is released the pressureswitch turns off the pump, the high pressure jet is stopped.If the lever is pulled the pump is turned on again.Technical FeaturesIntended useField of applicationSafety installationsLock trigger gunOverflow valve with pressure switch