Kärcher AP 100 M Service Manual

Contents

Kärcher AP 100 M Service Manual Manual pdf 43 page image

English 5.906-508.0 Rev. 00 (11/10) 431 Suction turbine plate2 Fastening screw3 High pressure/low pressure solenoid valveÎ Unscrew the fastening screws of the suction tur-bine plate.Î Raise the suction turbine plate.Î Disconnect all the connecting cables of the suctionturbine.1 Fastening nut of the protective conductor2 Connecting block3 Fastening screwÎ Unscrew the fastening screws of the terminal strip.Î Remove the terminal block.Î Unscrew the protective conductor from the suctionturbine plate.Î Remove all the cable ties.1 Fresh water tank2 Water filter3 Supply hose for fresh water4 Hose clipÎ Loosen the hose clamps on the fresh water reser-voir and on the water filter.Î Remove the fresh water supply hose.1 Fresh water tank2 Fresh water return hose3 Hose clipÎ Loosen the hose clamp on the fresh water reser-voir.Î Remove the fresh water return hose.Î Loosen the hose clamp on the fresh water drainhose.Î Remove the fresh water drain hose.