English 5.906-508.0 Rev. 00 (11/10) 41NoteThe fresh water drain hose is also used as a fill leveldisplay.Preliminary tasks:Î Empty the fresh water reservoir.Î Lay the device on the side.1 Fresh water tank2 Drainage hose for fresh waterÎ Loosen the hose clamp on the fresh water drainhose.Î Remove the fresh water drain hose.Installation in reverse orderNoteAfter the assembly, check all hoses for leaks.If the filter sieve in the water filter is dirty, it must becleaned or replaced if necessary.1 Fresh water tank2 Filter pot3 WaterfilterÎ Empty the fresh water reservoir.Î Unscrew the filter cup.Î Clean/replace the filter insert.Î Place the cleaned or new filter insert in the filtercup and tighten the screws of the filter cup.Î Fill up fresh water reservoir.NoteAfter the installation, check the water filter for leaks.5.10.3Remove the fresh water drain hose. 5.10.4Clean/replace the water filter