Kärcher AP 100 M Service Manual

Contents

Kärcher AP 100 M Service Manual Manual pdf 26 page image

26 English 5.906-508.0 Rev. 00 (11/10)NoteThe terminal strip is located on the suction turbineplate next to the suction turbine.Preliminary tasks:Î Remove operating panel.Î Remove the wastewater reservoir.Î Remove suction turbine plate.1 Connecting blockÎ Check the cables by means of the following table.Installation in reverse orderNoteAfter the assembly, check all hoses for leaks.5.4 Electrical system5.4.1 Check the population of the terminal stripPlug-in location Cable color Connected component1 black EMC filter2 - empty3 white EMC filter4 light brown/black Appliance switch ON/OFF5 blue Appliance switch ON/OFF6 - empty7 black Appliance switch ON/OFF8 black High pressure/low pressure solenoid valve9 orange Pump switch10 red Fuse 5 A11 light brown Fuse 7 A12 black Suction turbine13 black High pressure/low pressure solenoid valve14 black Suction turbine15 black Pump motor16 white Pump motor