Kärcher AP 100 M Service Manual

Contents

Kärcher AP 100 M Service Manual Manual pdf 25 page image

English 5.906-508.0 Rev. 00 (11/10) 25If an axle is damaged, the entire wheel support mustbe replaced.Preliminary tasks:Î Empty the fresh water tank and waste water reser-voir.Î Lay the device on the side.1 Water filter2 Wheel support3 Fastening screwÎ Unscrew the fastening screws of the wheel sup-port.Î Carefully remove the wheel support.Î Loosen the hose clamps from the fresh water hoseand the detergent hose and pull the hoses off.Î Pull the high pressure hose from the pump.Installation in reverse orderNoteAfter the assembly, check all hoses for leaks.Preliminary tasks:Î Empty the fresh water tank and waste water reser-voir.Î Lay the device on the side.Î Pry the lid cap off of the wheel.1 Tension capÎ Press the tension cap out.Î Remove wheel.Installation in reverse orderNoteUse new tension caps during installation.5.3 Wheel support5.3.1 Remove the wheel support 5.3.2 Removing the wheel