JVC ShowView LPT1100-001A Instructions Manual

Also see for DR-DX5SE: Instructions Bedienungsanleitung

Contents

82 EN TROUBLESHOOTINGPlayback (DV Deck)● The DV deck is not selected.] Press DV/HDD/DVD SELECT on the unit repeatedly or DV onthe remote control so that the DV lamp lights up on the unit.● The tape is already fully rewound or fast-forwarded.] Check the cassette.● The TV is not set to the AV mode.] Set the TV to the AV mode.● This is normal.● The video heads may be dirty.] Use a dry cleaning cassette M-DV12CL, or consult your JVCdealer.Recording (DVD Deck)● The channel position does not correspond to that in thereceiving area.] Set the correct channel position for the receiving broadcast.(A pg. 74)● No disc or a disc not being compatible with the unit is loaded.] Load a recordable disc on the unit. (A pg. 5)● The disc loaded is not formatted.] Format the disc. (A pg. 78)● A finalised DVD-R disc is loaded.] Recording cannot be made on finalised discs. Load arecordable disc on the unit.● The disc is full or does not have enough space for the title to berecorded.] Clear unnecessary titles on the disc or load a blank disc.(A pg. 51)● The DVD-RAM disc loaded has had its protect tab slid to theprotect position.] Release the protect tab. (A pg. 8)Recording (HDD Deck)● AL-1B, AL-2B or AF-1B has been selected as the input mode.] Set to the desired channel.● The camcorder has not been properly connected.] Confirm that the camcorder is properly connected.● The input mode is not correct.] Set the input mode to AF-1B. (A pg. 61)Recording (DV Deck)● The unit is in the Record Pause mode.] Press I to resume recording.● There is no cassette loaded, or the cassette loaded has had itserase protection switch set to ASAVEB.] Insert a Mini DV cassette, or set the erase protection switch setto ARECB.● An attempt has been made to record from this unit’s built-intuner.] It is not possible to record from this unit’s built-in tuner to the DVdeck. Record to the HDD or a DVD disc.If you want to record on a DV tape, record by connecting theoutput of the external equipment such as a satellite receiver tothis unit’s external input ([L-2 IN/DECODER], etc.).● The camcorder has not been properly connected.] Confirm that the camcorder is properly connected.● The input mode is not correct.] Set the input mode to AF-1B or ADVB.● The end of the tape was reached during recording.] The programme may not have been recorded in its entirety.Next time make sure you have enough time on the tape torecord the entire programme.● ADV AUDIO RECB had been set to A16BITB at the originalrecording.] Set ADV AUDIO RECB to A12BITB at the original recording.● The tape speed had been set to LP at the original recording.] Set the tape speed to SP at the original recording.] This is normal. Monitor the sound using the connected devices.The DV deck cannot be operated.The tape will not rewind or fast-forward.The playback picture does not appear while the tape isrunning.Noise appears during visual search.The playback picture is blurred or interrupted while TVbroadcasts are clear or AUSE CLEANING CASSETTEBmessage appears on the screen.The desired programme cannot be recorded.Recording cannot be made.TV broadcasts cannot be recorded.Camcorder recording is not possible.During recording, the tape does not run. The DV recordinglamp lights up on the unit.Recording cannot be done.Camcorder recording is not possible.The tape is automatically rewound, then the unit is shut off.Audio dubbing is not possible.Monitoring the audio dubbed sound is not possible duringaudio dubbing.