EN 21INITIAL SETTINGSYou can select the monitor type depending on the TV used whenyou play back DVD VIDEO discs recorded for wide-screen TVs.1 Press DVD so that the DVD lamp lights up on the unit.2 Press SET UP to access the Main Menu screen.● You cannot set the monitor type during recording or playback.3 Press selection keys to select AFUNCTION SET UPB, thenpress G.4 Press selection keys to selectAVIDEO IN/OUTB, then pressG.5 Press selection keys to selectAMONITOR TYPEB, then pressENTER.6 Press selection keys to selectthe desired option, then pressENTER.7 Press SET UP to complete the setting.* The boldface settings below indicate the settings at your purchase.8 MONITOR TYPE - 4:3LB / 4:3PS / 16:9AUTO / 16:9FIX4:3LB (Letter Box conversion):Select this when the aspect ratio of your TV is 4:3 (conventionalTV). While viewing a wide screen picture, the black bars appearon the top and the bottom of the screen.4:3PS (Pan&Scan):Select this when the aspect ratio of your TV is 4:3 (conventionalTV). While viewing a wide screen picture, the black bars do notappear; however, the left and right edges of the pictures will notbe shown on the screen.16:9AUTO (Wide television conversion):Select this when the aspect ratio of your TV is 16:9 (wide TV).16:9FIX (Wide television conversion):Select this when the aspect ratio of your TV is fixed to 16:9(wide TV). The unit automatically adjusts the screen width ofthe output signal correctly when playing back a picture whoseaspect ratio is 4:3.Pan&Scan/Letter BoxIn general, DVD VIDEO disc are produced for a wide-screen TVwith 16:9 aspect ratio.Material with this ratio will not fit to a TV with 4:3 aspect ratio.There are two styles to display the image, APan&ScanB (PS) andALetter BoxB (LB).Pan&ScanThe right and left side of the image are cut off.The image fills the screen.● The picture will be shown in the A4:3LBB modedepending on the disc even if the A4:3PSBmode is selected.Letter BoxBlack bands appear at the top and bottom ofthe image. The image itself appears in 16:9aspect ratio.Monitor Set● Turn on the unit.● Turn on the TV and select the AV mode.● Slide the TV/CABLE/SAT/DVD switch to DVD.FGDEENTERSET UPDVDCABLE/SATDVDTVSelection KeysENTERSELECTSET UPEXITDVD VIDEO SET UPMONITOR TYPEHDD/DVD/DV SET UP FUNCTION SET UP INITIAL SET UPREC/PLAY SET UP DISPLAY SETF-1 INPUTL-1 OUTPUTL-1 INPUTL-2 SELECTVIDEO IN/OUTVIDEOVIDEOVIDEOSCART VIDEO4:3LBSELECT WITH @ THEN PRESS [ENTER]PRESS [SET UP] TO EXIT