JVC ShowView LPT1100-001A Instructions Manual

Also see for DR-DX5SE: Instructions Bedienungsanleitung

Contents

38 EN BASIC OPERATIONS ON HDD DECKOne Touch ReplayYou can move back the playback position slightly.Press w.● Each press skips back for approximately 7 seconds and resumesplayback.● Pressing while paused skips back for approximately 7 secondsand resumes pause.1.5x Speed PlaybackYou can play back a title quickly. The sound will also be playedback faster than normal speed during 1.5x speed playback.1.5x speed playback cannot be performed during recording onHDD or DVD.1 Press O to locate the point to start 1.5x speed playback from.2 Press I to resume playback.3 Press N once.● Pressing ON SCREEN displays AX1.5B on the top right corner ofthe screen.NOTE:When the unit is connected with a digital audio device using anoptional optical cable, set ADIGITAL AUDIO OUTB to APCM ONLYB.(A pg. 26)Jump SearchYou can locate a scene ahead or behind the current one byjumping scenes according to selected time intervals (A pg. 73)during playback (or Live Memory Playback).Press JUMP – or JUMP +.● To advance forward or back, press JUMP – or JUMP +repeatedly within 5 seconds of each press to continue jump.● Depending on the time from where you want to start jump search,the first press of JUMP – or JUMP + will not necessarily lead to ajump of the selected time interval. The first press will lead to ajump to the nearest quarter points of an hour (15 min/ 30 min/ 45min/ 00 min). The subsequent jumps will then be in accordanceto the selected time interval.● When you cannot advance any further (beginning or end ofprogramme reached), the message AUNABLE TO GO BACKANY MOREB appears on the screen and the on-air screenresumes. In such a case, press S, O or o.Example:Playback search when jump interval is set to 15 MIN jumps.Taking for instance, you want to start jump search 40 minutes afterthe beginning of the programme. Pressing JUMP – or JUMP + willresult in a jump to the scene at the 30 minutes point or 45 minutespoint respectively as illustrated below. At the subsequent press, thescene will jump to the 15 minutes point or 1 hour point respectively,according to the selected time interval, which in this case is A15MINB.Marking Positions To Play Back Again LaterIt is possible to mark positions (up to 999 points) where you want toplay back once again later, and start playback from a markedposition. Marking onto the disc when recording is helpful to locatea start point when you play back the disc later.To mark positions:During playback, press MARK atpositions you want to mark.● AMARKB appears on the TV screen.You can easily locate the markedpositions using S or T whenyou play back the disc.To delete the marked positions:While paused, press S or T tolocate a marked position you want todelete, then press MARK.● Crossed AMARKB appears on theTV screen, and the marked positionis deleted.NOTE:When a monaural programme changes to a stereo programmewhile recording, a mark signal is automatically recorded.Time counterBeginning of programme Current scene End of programme0 min30 min 1 h40 min 1 h 15 min15 min 45 min