265 Using the FeaturesTime Shift Recording onto a USB Storage DeviceThis function allows you to pause live TV. The picture will pause and the programme will begin recording so you don't miss any ofthe programme. You will have to have a USB storage device attached to the USB socket for Time Shift Recording to work.Using the Remote ControlYou can shift playback to any point of the virtually recorded programme.or When playing,• Press the button repeatedly to speed up - x 2 / x 4 / x 8 / x 16 / x 32.• During fast forward press the (PLAY) button to return to normal playback.When paused• Press the button repeatedly to view in slow motion - x 1/4 / x 1/2 / x 1 (normal playback).• During playback, press the button to display a still screen and then press the button again orthe (PLAY) button to resume playback.OK When timeshifting press the OK button to play or pause the recording.If you want to exit timeshifting, press the button.The ‘PVR Time Shift Progress Bar’1 Indicates the status of the currentlydisplayed video ( / / / )2 Channel name being recorded.3 Programme name being recorded.4 Indicates the amount of timerecorded.23 41While watching your TV, you may press the button to pause the live programme if you want to go out for a while (e.g. going tothe bathroom / kitchen). " " will show on the screen.When you have returned, press the (PLAY) button to play the missed broadcast programme. " " will briefly show on thescreen.The video and sound may have a little bit of delay or be out-of-sync for a few seconds when the unit starts to playback the missedprogramme. It will soon turn to normal.If the transfer rate of the USB storage device is too slow forrecording or time shift function, a warning statement will beshown on the screen. If this happens, please upgrade your USBstorage device. The minimum transfer speed is 5MB/s.• Time Shift Mode and Recording functions maynot work if the signal strength is weak.• Stop the time shift function before switching toanother input source.LT-24C655/656(C)_IB.indd 26 26/04/2017 14:39