204 Customising TV Settings2. Press the buttons to select the following picture options and thenpress the OK button.• Press the buttons to adjust the levels in the menus.Adjusting the Picture SettingsAllows you to set your preferred picture mode.1. Press the MENU button and then press the buttons to select thePICTURE and then press the OK button.Picture Mode Your TV has some pre-set picture modes: Dynamic - Natural - Cinema - Game. The default settingis Standard. You can also manually adjust each mode.Contrast Adjusts the difference between light and dark levels in the picture.Brightness Increases or decreases the picture brightness.Sharpness Adjusts the level of crispness in the edges between light and dark areas of the picture.Colour Controls the colour intensity.Energy Saving The energy saving mode can be adjusted from Custom - OFF - Minimum - Medium - Maximum- Auto - Screen Off. Adjusting this setting will reduce the brightness and power consumption ofyour TV or turn the screen off altogether.Backlight Adjusts the backlight setting. Only available when Custom Energy Saving is selected above.AdvancedPicture SettingsSelect to have more advanced adjustments to your TVs picture.DynamicContrastAdjusts the contrast to pre-set levels.OFF - LOW - MEDIUM -HIGHNoiseReductionReduces the noise level of theconnected device: Off / Low / Middle/ High.ColourTempAdjusts the colour temperature.NORMAL - WARM - COOLPictureZoomAdjusts the aspect ration of thepicture. AUTO - 16:9 - SUBTITLE - 14:9- 14:9 Zoom - 4:3 - CINEMA.Film Mode Film mode can be switched to AUTOor OFF. Auto mode will adjust theframe rate to produce the clearestmotion.Skin Tone Adjusts the skin tone from -5 to 5.ColourShiftAdjusts the colour tint from red togreen.ColourShiftSelect to adjust the picture colourbetween Red and Green.3. Press the BACK button to return to the previous menu.4. Press the EXIT button to exit the menu.Chapter4LT-24C655/656(C)_IB.indd 20 26/04/2017 14:39