JVC LT-24C655C Instruction Manual

Also see for LT-24C655: Quick start guide Quick start guide Instruction manual

193Initial SetupConnecting an Analogue DeviceIf you have connected an analogue device such as a video recorder via theaerial socket on your TV you will have to tune it in using Analogue mode. Ensurethe device is switched on before you start the tuning process.1. Press the MENU button, press the buttons to select INSTALL ANDRETUNE and press OK.2. Select AUTOMATIC CHANNEL SCAN (RETUNE) and press OK.3. Press the buttons to select ANALOGUE and press OK.4. Press the buttons to select YES then press OK. The search willautomatically start, this will not delete your Digital channels, so don't worry!5. When the search has finished the EDIT CHANNEL LIST will appear. Youranalogue channel will be at the end of the channel list.• If a locked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, thechannel will then be unlocked (refer to Locking Channel for details).• Press the button to return to the previously viewed channel.Display Channel Information• Press the INFO button to view the current information.Volume Adjustment• Press the V + or – button on the remote control or rotate the multi-functionswitch up or down on the back of the TV.• If you wish to switch the sound off, press the button. You can turn thevolume down while your TV is in mute mode. Press the VOL – button, youwill see the volume level reduce, but you won't hear anything at the moment.To listen to your TV at the new lower level, press the button again or VOL+ button.Channel Selection• Press the P + / – buttons on the remote control repeatedly or the 0-9 buttons to select the channel.AlternativePress the OK button to enter the Channel List. Then use the buttons to highlight and select the channel.Press the OK button to view the selected channel.ORPress the i (info) button then the buttons to search for a channel you wish to watch then press OK.LT-24C655/656(C)_IB.indd 19 26/04/2017 14:39