JVC KD-NX5000 Instructions Manual

Also see for KD NX5000 - Navigation System With HDD: Brochure Instructions Instructions Instructions Installation & connection manual

Contents

ENGLISH96Menu items Selectable settings (Initial setting)SoundHigh Pass Filter Through: Select when the subwoofer is not connected.On: Select when the subwoofer is connected.Crossover Adjust the crossover frequency between the front/rearspeakers and the subwoofer.55 Hz, 85 Hz, 125 HzAmplifier Gain You can change the maximum volume level of thisreceiver.Amplifier Off: Deactivates the built-in amplifier.Low Power: Volume 00 to 30 (Select this if the maximumpower of the speakers is less than 50 W)High Power: Volume 00 to 50Screen Control/Picture [Disc]/Picture [Video]You can adjust the monitor to make it clear and legible.• While picture from VIDEO IN is displayed, you canadjust the playback picture of VIDEO IN (Picture[Video]).• While DISC is selected as the source and playbackpicture is displayed, you can adjust the playback pictureof DISC (Picture [Disc]).• For other screens than above, Screen Controlappears.*15Bright*16: Adjust if the picture is too bright or too dark.–15 to +15 (00)Color Temp.: Adjust the colour temperature of thepicture—warmer or cooler. –15 to +15 (00)Contrast: Adjust the contrast. –15 to +15 (00)Tint: Adjust the tint if the human skin colour is unnatural.–15 to +15 (00)• Tint is adjustable only for VIDEO IN signal in NTSCand discs in NTSC.*15 The settings of Screen Control are also applied to the map screen and screens of Navigation Menus.*16 This setting in Screen Control is shared with Brightness setting in Setup Menu (☞ [44]).Screen ControlExit+03Bright