JVC GV-LS2W User Manual

Also see for GV-LS2: Specification sheet User guide Connection guide User guide User guide

Contents

53InformationError messagesMessage Check Refer toPLEASE INSERT MEMORY CARD! • To record, insert an SD card into the camera. page 28NEED TO FORMAT MEMORYCARD.• If a card is used for the first time after purchase orhas been used with other devices, it may need to beformatted with this unit.page 46THIS CARD CANNOT BE USEDFOR RECORDING OR EDITINGON THIS CAMERA• Format the card. page 46INSUFFICIENT AVAILABLE SPACE • Available space is insufficient. Delete unnecessaryfiles. page 37SCENE QUANTITY EXCEEDEDLIMIT• There are too many recorded files. Delete unnecessaryfiles. page 37CHECK CARD'S WRITEPROTECTION SWITCH• The write-protection switch of the SD card is set to the"LOCK" position. Unprotect it. –VIDEO MANAGEMENT FILEIS DAMAGED, RECOVERY INPROGRESS• The management file must be recovered e.g. afterthe SD card read/write operation is performed on acomputer, etc. Wait until it completes.–MANAGEMENT FILE ISDAMAGED• The management file could not be recovered. Formatthe SD card. page 46RECORDING FAILURE • The recorded file could not be saved. Check the SDcard. page 28RECORDING CANCELLED • The file could not be saved, and recording wascancelled. Check the transmission speed of the card. page 28MEMORY CARD ERROR! • The SD card cannot be recognized. Check the card. page 28COMPATIBLE DEVICE NOTFOUND• No WPS-compatible device can be found. Check ifthere is a distance or interference between the devices. –COMMUNICATION ERROROCCURRED • Check the connection and destination device. –UNABLE TO LOG INCHECK THE USERNAME ANDPASSWORD• Enter the correct user name and password. For theadministrator's account, the initial setting of the username is "root", and that of the password is "password".–INVALID OPERATION • You cannot operate the camera/pantilter while theadministrator is operating it. –UNABLE TO SWITCH DURINGRECORDING• You cannot open the "FILE MANAGEMENT" tab duringrecording. Stop recording. page 34UNABLE TO UPDATE DURINGRECORDING• You cannot change the "DIS"/"GAIN UP" setting duringstreaming/recording. Stop streaming/recording. –INVALID DATA INPUT • Check the type of the entered text (character, number,single-byte/double-byte, etc.). –THE USERNAME IS ALREADY INUSE• You cannot register a user name already in use. Enteranother user name. –